Electrochemical oxidation of water on synthetic boron-doped diamond thin film anodes

Electrolysis in aqueous 1 M HClO4 and 1 M H2SO4 solutions has been carried out under galvanostatic conditions using boron-doped diamond electrodes (BDD). Analyses of the oxidation products have shown that in 1 M HClO4 the main reaction is oxygen evolution, while in H2SO4 the main reaction is the formation of H2S2O8. In both electrolytes small amounts of O3 and H2O2 are formed. Finally, a simplified mechanism involving hydroxyl radicals formed by water discharge has been proposed for water oxidation on boron-doped diamond anode

Volcanic hazard assessment at the Campi Flegrei caldera

Previous and new results from probabilistic approaches based on available volcanological data from real eruptions of Campi Flegrei, are assembled in a comprehensive assessment of volcanic hazards at the Campi Flegrei caldera, in order to compare the volcanic hazards related to the different types of events. Hazard maps based on a very wide set of numerical simulations, produced using field and laboratory data as input parameters relative to the whole range of fallout and pyroclastic-flow events and their relative occurrence, are presented. The results allow us to quantitatively evaluate and compare the hazard related to pyroclastic fallout and density currents (PDCs) in the Campi Flegrei area and its surroundings, including the city of Naples. Due to the dominant wind directions, the hazard from fallout mostly affects the area east of the caldera, and the caldera itself, with the level of probability and expected thickness decreasing with distance from the caldera and outside the eastern sectors. The hazard from PDCs decrease roughly radially with distance from the caldera centre and is strongly controlled by the topographic relief, which produces an effective barrier to propagation of PDCs to the east and northeast, areas which include metropolitan Naples. The main result is that the metropolitan area of Naples would be directly exposed to both fallout and PDCs. Moreover, the level of probability for critical tephra accumulation by fallout is relatively high, even for moderate-scale events, while, due to the presence of topographic barriers, the hazard from PDCs is only moderate and mostly associated with the largest events

Electrochemical polymerisation of phenol in aqueous solution on a Ta/PbO2 anode

This paper deals with the treatment of aqueous phenol solutions using an electrochemical technique. Phenol can be partly eliminated from aqueous solution by electrochemically initiated polymerisation. Galvanostatic electrolyses of phenol solutions at concentration up to 0.1 mol dm−3 were carried out on a Ta/PbO2 anode. The polymers formed are insoluble in acidic medium but soluble in alkaline. These polymers were filtered and then dissolved in aqueous solution of sodium hydroxide (1 mol dm−3). The polymers formed were quantified by total organic carbon (TOC) measurement. It was found that the conversion of phenol into polymers increases as a function of initial concentration, anodic current density, temperature, and solution pH. The percentage of phenol polymerised can reach 15%

Testing the predictive validity of the healthy eating index-2015 in the multiethnic cohort: Is the score associated with a reduced risk of all-cause and cause-specific mortality?

The Healthy Eating Index-2015 (HEI-2015) was created to assess conformance of dietary intake with the Dietary Guidelines for Americans (DGA) 2015–2020. We assessed the association between the HEI-2015 and mortality from all-cause, cardiovascular disease (CVD), and cancer in the Multiethnic Cohort (MEC). White, African American, Native Hawaiian, Japanese American, and Latino adults (n > 215,000) from Hawaii and California completed a quantitative food-frequency questionnaire at study enrollment. HEI-2015 scores were divided into quintiles for men and women. Radar graphs were used to demonstrate how dietary components contributed to HEI-2015 scores. Mortality was documented over 17–22 years of follow-up. Hazard ratios (HRs) and 95% confidence intervals (CIs) were computed using Cox proportional hazards models. High HEI-2015 scores were inversely associated with risk of mortality from all-cause, CVD, and cancer for men and women (p-trend <0.0001 for all models). For men, the HRs (CIs) for all-cause, CVD, and cancer comparing the highest to the lowest quintile were 0.79 (0.76, 0.82), 0.76 (0.71, 0.82), and 0.80 (0.75, 0.87), respectively. For women, the HRs were 0.79 (0.76, 0.82), 0.75 (0.70, 0.81), and 0.84 (0.78, 0.91), respectively. These results, in a multiethnic population, demonstrate that following a diet aligned with the DGAs 2015–2020 recommendations is associated with lower risk of mortality from all-cause, CVD, and cancer

Corporate debt, firm size and financial fragility in emerging markets

The post-Global Financial Crisis period shows a surge in corporate leverage in emerging markets and a number of countries with deteriorated corporate financial fragility indicators (Altman's Z-score). Firm size plays a critical role in the relationship between leverage, firm fragility and exchange rate movements in emerging markets. While the relationship between firm-leverage and distress scores varies over time, the relationship between firm size and corporate vulnerability is relatively time-invariant. All else equal, large firms in emerging markets are more financially vulnerable and also systemically important. Consistent with the granular origins of aggregate fluctuations in Gabaix (2011), idiosyncratic shocks to the sales growth of large firms are positively and significantly correlated with GDP growth in our emerging markets sample. Relatedly, the negative impact of exchange rate shocks has a more acute impact on the sales growth of the more highly levered large firms

Planting time for maximization of yield of vinegar plant calyx (Hibiscus sabdariffa L.)

Objetivou-se avaliar a produtividade de cálices de Hibiscus sabdariffa L., planta medicinal, em quatro épocas de plantio em Lavras M.G. Os tratamentos foram quatro épocas de plantio (18 de outubro; 15 de novembro; 18 de dezembro de 2001 e 15 de janeiro de 2002) e realizada uma colheita quando praticamente não existiam cálices em desenvolvimento, quase no final do ciclo da planta. Foram considerados os números de cálices por planta, as fitomassas frescas e secas dos cálices e a qualidade. Concluiu-se que a época de plantio influenciou o rendimento por planta e as fitomassas frescas e secas dos cálices, diferindo entre si pelo teste de Tukey a 5%. No plantio de outubro, houve maior rendimento (2.522 kg/ha), com produção de 5,24 vezes a mais em relação ao plantio do mês de janeiro (481 kg/ha). Os plantios nos meses de novembro e dezembro tiveram produções de 1.695 e 1.093 kg.ha-1 de cálices secos, respectivamente, e em relação ao mês de janeiro, a produção foi 3,52 e 2,27 vezes a mais.Deve-se realizar a colheita assim que os cálices estiverem maduros, a fim de preservar a qualidade

Budding yeast ATM/ATR control meiotic double-strand break (DSB) levels by down-regulating Rec114, an essential component of the DSB-machinery

An essential feature of meiosis is Spo11 catalysis of programmed DNA double strand breaks (DSBs). Evidence suggests that the number of DSBs generated per meiosis is genetically determined and that this ability to maintain a pre-determined DSB level, or "DSB homeostasis", might be a property of the meiotic program. Here, we present direct evidence that Rec114, an evolutionarily conserved essential component of the meiotic DSB-machinery, interacts with DSB hotspot DNA, and that Tel1 and Mec1, the budding yeast ATM and ATR, respectively, down-regulate Rec114 upon meiotic DSB formation through phosphorylation. Mimicking constitutive phosphorylation reduces the interaction between Rec114 and DSB hotspot DNA, resulting in a reduction and/or delay in DSB formation. Conversely, a non-phosphorylatable rec114 allele confers a genome-wide increase in both DSB levels and in the interaction between Rec114 and the DSB hotspot DNA. These observations strongly suggest that Tel1 and/or Mec1 phosphorylation of Rec114 following Spo11 catalysis down-regulates DSB formation by limiting the interaction between Rec114 and DSB hotspots. We also present evidence that Ndt80, a meiosis specific transcription factor, contributes to Rec114 degradation, consistent with its requirement for complete cessation of DSB formation. Loss of Rec114 foci from chromatin is associated with homolog synapsis but independent of Ndt80 or Tel1/Mec1 phosphorylation. Taken together, we present evidence for three independent ways of regulating Rec114 activity, which likely contribute to meiotic DSBs-homeostasis in maintaining genetically determined levels of breaks

Enhanced diffuse optical tomographic reconstruction using concurrent ultrasound information

Multimodal imaging is an active branch of research as it has the potential to improve common medical imaging techniques. Diffuse optical tomography (DOT) is an example of a low resolution, functional imaging modality that typically has very low resolution due to the ill-posedness of its underlying inverse problem. Combining the functional information of DOT with a high resolution structural imaging modality has been studied widely. In particular, the combination of DOT with ultrasound (US) could serve as a useful tool for clinicians for the formulation of accurate diagnosis of breast lesions. In this paper, we propose a novel method for US-guided DOT reconstruction using a portable time-domain measurement system. B-mode US imaging is used to retrieve morphological information on the probed tissues by means of a semi-automatical segmentation procedure based on active contour fitting. A two-dimensional to three-dimensional extrapolation procedure, based on the concept of distance transform, is then applied to generate a three-dimensional edge-weighting prior for the regularization of DOT. The reconstruction procedure has been tested on experimental data obtained on specifically designed dual-modality silicon phantoms. Results show a substantial quantification improvement upon the application of the implemented technique. This article is part of the theme issue ‘Synergistic tomographic image reconstruction: part 2’

Deposition of tin oxide, iridium and iridium oxide films by metal-organic chemical vapor deposition for electrochemical wastewater treatment

In this research, the specific electrodes were prepared by metal-organic chemical vapor deposition (MOCVD) in a hot-wall CVD reactor with the presence of O2 under reduced pressure. The Ir protective layer was deposited by using (Methylcyclopentadienyl) (1,5-cyclooctadiene) iridium (I), (MeCp)Ir(COD), as precursor. Tetraethyltin (TET) was used as precursor for the deposition of SnO2 active layer. The optimum condition for Ir film deposition was at 300 °C, 125 of O2/(MeCp)Ir(COD) molar ratio and 12 Torr of total pressure. While that of SnO2 active layer was at 380 °C, 1200 of O2/TET molar ratio and 15 Torr of total pressure. The prepared SnO2/Ir/Ti electrodes were tested for anodic oxidation of organic pollutant in a simple three-electrode electrochemical reactor using oxalic acid as model solution. The electrochemical experiments indicate that more than 80% of organic pollutant was removed after 2.1 Ah/L of charge has been applied. The kinetic investigation gives a two-step process for organic pollutant degradation, the kinetic was zero-order and first-order with respect to TOC of model solution for high and low TOC concentrations, respectively

Shear induced instabilities in layered liquids

Motivated by the experimentally observed shear-induced destabilization and reorientation of smectic A like systems, we consider an extended formulation of smectic A hydrodynamics. We include both, the smectic layering (via the layer displacement u and the layer normal p) and the director n of the underlying nematic order in our macroscopic hydrodynamic description and allow both directions to differ in non equilibrium situations. In an homeotropically aligned sample the nematic director does couple to an applied simple shear, whereas the smectic layering stays unchanged. This difference leads to a finite (but usually small) angle between n and p, which we find to be equivalent to an effective dilatation of the layers. This effective dilatation leads, above a certain threshold, to an undulation instability of the layers. We generalize our earlier approach [Rheol. Acta, vol.39(3), 15] and include the cross couplings with the velocity field and the order parameters for orientational and positional order and show how the order parameters interact with the undulation instability. We explore the influence of various material parameters on the instability. Comparing our results to recent experiments and molecular dynamic simulations, we find a good qualitative agreement.Comment: 15 pages, 12 figures, accepted for publication in PR